Diamond Vision DVD Player Region-Free Hack and Review

This review and regionless hack applies to thedisplayed. Use the UP and DOWN arrow keys on the
following DVD / MP3 / CD player: Diamond Visionremote control to display a specific region's numerical
DVDV807-03. The DVD player's manual also includescode, or select '0' (regionless).
instructions for the DVDV807-04 model, so most of5.) Press ENTER and then SETUP to exit.
this information should apply to it as well.6.) Your DVD player will now play DVDs from other
Whether you intend to watch foreign language videosregions. The code only has to be entered once.
in order to learn a new language, or because somePowering down will not cause the Diamond Vision to
titles are not available where you live, DVDs fromlose its region-free setting. An added plus: it
another region will probably be unplayable on yourautomatically senses PAL/NTSC signals.
current DVD player. However, a DVD machine canAccording to videohelp.com, this region hack will also
often be converted (hacked) to a different region via awork with many other Diamond Vision DVD players.
remote control sequence or firmware upgrade.This unit is a pretty standard economy DVD player.
Sometimes you can even buy customized chips toYou can usually find it for well under $50 in most
modify the hardware.Wal-Marts. It is approximately 9 inches wide by 10
The simplest and least expensive way to hack a DVDinches deep, and the remote control is a little nicer and
player is to find a cheap unit that can be fine-tuned viabigger than what comes with a lot of discount DVD
a remote control sequence. That is what this article isunits.
all about.This machine provides several types of video and
The Diamond Vision DVDV 807-3 player isaudio output:
front-loading. It proved itself to be reliable during my1.)Y/Pb, Cb/Pr, Cr
testing. There are a couple of annoyances, however:2.) RCA
1.) The DVD-spinning mechanism tends to be a little3.) S-Video
loud (minor inconvenience).For a budget player, it certainly is a bargain, considering
2.) If you try to operate STOP, OPEN, and PLAYthe capabilities.
buttons too quickly, the player sometimes locks up.*Note: You can determine the region code for any
Powering down and restarting always resets theDVD by looking at the packaging. You might see
player successfully.something that looks like a button with a globe in the
*The region-free hack works as follows:background and a large number. The DVD may
1.) Turn on the power and wait until the 'NO DISC'specifically state something like 'Region 1'. If no code is
message appears, then press OPEN/CLOSE on theshown, it may be regionless right out of the box. Some
unit itself to open the door of the DVD playerolder titles, budget productions, or remakes of older
2.) On the remote control, press SETUP. A menu willfilms often do not have any region protection added.
appear onscreen.Current region codes on commercial titles range from 1
3.) Enter the following number sequence via remote: 1to 6.
3 8 9It's a good move if you decide to purchase this unit.
4.) A different menu will appear. Your cursor shouldYou should definitely get your money's worth.
now be sitting in a box with the current region