| Every time we see robots, we are always in awe | | | | batteries. |
| because of such amazing inventions. We give high | | | | The next step on how to build a robot is to make a |
| praise to the inventors because we know that building | | | | connection with the use of the battery holder. The |
| robots is not easy. However, we must remember that | | | | result of this is another connection. Make a connection |
| everything starts with small things. Therefore, even in | | | | using the black and red wires while the blue wire |
| making a robot, there is definitely a simple way on how | | | | creates the new connection. |
| to build it. Let us take a look at one of the easy ways | | | | The battery holder should now be turned upside down, |
| on how to build a robot. | | | | letting the batteries face the ground. The two SPDT |
| In building a beetle robot, the materials needed include | | | | switches should then be glued to the battery holder, |
| the following: | | | | forming a V shape. The motor should then be glued to |
| -Mini glue gun | | | | each of the switches, allowing the shaft to touch the |
| -Diagonal cutter | | | | ground. |
| -Electronic solder | | | | The next step on how to build a robot is to make the |
| -Soldering iron | | | | caster with the use of the big paper clip. Now, create |
| -2x - sub mini lever SPDT switches | | | | an antenna using the small paper clip. The antennas |
| -1x - meter of electric wire | | | | should be glued to the switches but we must take |
| -1x - wooden pearl, which is needed for the caster | | | | note that only small amount of glue should be used. |
| -1x - 2 cm of heat shrink | | | | The shaft of the motors should be added with a |
| -1x - battery holder AA | | | | centimeter of heat shrink. |
| -2x - big paper clips | | | | The last step on how to build a robot is to put the |
| -2x - small paper clips | | | | batteries inside the holder, place the finished product on |
| -2x - small 1.5 Volts of motors | | | | the ground and see how it moves! |
| The first step on how to build a robot is to cut thirteen | | | | See, it is not difficult to create a simple robot. As soon |
| pieces of 6-cm electric wires and then both ends of | | | | as we learn to build small or simple robots, we just |
| each of the 6-cm wires should be stripped at least 1 | | | | have to think big in order to be inspired to create |
| cm long. Each wire should then be soldered to each | | | | bigger ones. |
| component mentioned above aside from the two | | | | |